This document provides instructions to use Zeroframe on a Tokenframe. With this setup the Zeroframe application will open up automatically after restart. You’ll be able to reset the frame back to Tokenframe if you desire to.

  1. Start your Tokenframe display.
  2. Plug in a keyboard and mouse on the USB ports. Press Ctrl + Esc to open the Android Settings.
    1. If the Tokenframe app hasn’t completely initialized, you might get returned to the Tokenframe app after a moment – if so, press Control + Esc again to get back to the Settings screen
  3. Download the Zeroframe APK from https://zeroframe.art/zf.apk and put it on a USB drive.
  4. Insert the drive on the back of the frame, go to Settings → Storage → USB and double click the APK to install it
  5. Make Zeroframe the Home App so it boots automatically on start:
    1. For the 21.5’’: Go to Settings → Apps → App Settings (gear in upper right corner) then Home App → select Zeroframe
    2. For the 43’’ and 55’’: Go to Settings → Apps → Zeroframe → Home App → select Zeroframe
  6. Reboot. It might ask if you want select the Zeroframe app as launcher, which you can select ‘Always’
  7. After restart, you should see a screen with a pairing code. The Tokenframe app may reappear briefly after a few seconds, but the Zeroframe app should retake the screen. This should only happen once.

linkFrame copy.png

  1. On your computer or phone, sign up or log in to zeroframe.art. You can use the code HAPPY25 to get 3 months for free.
  2. Create a frame, and add the pairing code

image.png

  1. You should now be able to push artworks to your Tokenframe. Enjoy!

👉 Please reach out to [email protected] if you run into any issues or have any questions.